Knowledge About Sprayers_Knowledge About Sprayers

problem

What are the differences between the sources of PM2.5 and PM10?

answer

problem

Hazards of and Control Measures for Unorganized Emission of Dust

answer

problem

Dust Removal in the Steel Industry

answer

The steel industry developed rapidly in the 20th century. The average over-limit ratio of PM2.5 was as high as 49.1%. With the increase of the PM indicators, the air visibility gradually decreased and the air quality was poor. The dust in the steel industry has caused immeasurable harm to the atmospheric environment by seriously polluting water resources, disrupting the balance of the ecosystem, causing unnecessary trouble to the natural world and inconveniencing people’s lives. According to the “Tenth Five-Year Plan” for the steel industry, the state has formulated strict pollution discharge standards for the steel industry, endeavoring to protect the environment, save water, and reduce pollution.

problem

To operate industrial and mining dust removal equipment, perform the three steps below:

answer

a. Always check the antenna of the handheld remote control to ensure a sound connection, otherwise the remote control will not work normally.

b. When you start the machine, please turn on the power switch first, and then release the emergency switch.

c. When you shut down the machine, first press the emergency switch (or turn the emergency switch from the ON position to the STOP position) and then turn the power switch from the ON position to the OFF position.

problem

What’s the effect of industrial and mining dust removal equipment after being used for a while?

answer

As people have higher requirements on urban environment, the standards for dust control is heightened increasingly, and the selection of industrial and mining dust removal equipment has to be time-proof. Since the pollution caused by fugitive dust is obvious, the application of industrial and mining dust removal equipment plays an effective role of suppressing the fugitive dust. We can see that the dust removal facilities keep suppressing the fugitive dust in demolition sites. They can also lastingly suppress the dust on the ground of construction sites that are severely hit by dust.

What are the differences between the sources of PM2.5 and PM10?

Hazards of and Control Measures for Unorganized Emission of Dust

Dust Removal in the Steel Industry

To operate industrial and mining dust removal equipment, perform the three steps below:

What’s the effect of industrial and mining dust removal equipment after being used for a while?

Follow the official WeChat account

OA

0392-3221111

0371-66797777